Lathe chucks are attachments that hold an accessory tool onto a lathe
machine. The chucks, when mounted to a lathe, hold additional lathe
accessories and tools in place. The lathe chuck builds functionality and
diversity into the lathe machine by adding new accessories. There are
many different sizes available in lathe chucks, all of which have a
specific purpose or design to support a specific tool or accessory.
Regardless of the size of the chuck, the installation process to the
lathe remains the same.
Instructions
1
Clean the spindle threads and chuck with the cleaning brush
to remove and dirt or debris. Lightly oil the spindle and chuck threads.
2
Turn the chuck onto the spindle slowly. Make sure the
threads are properly aligned to prevent cross-threading. If the chuck
does not turn easily, remove the chuck and try again as the threads are
misaligned.
3
Tighten the chuck by hand, turning it until the chuck touches the spindle.
Tips & Warnings
Never over-tighten
the chuck. The chuck will tighten as it is turned on the lathe and
over-tightening can strip the threads of the chuck and spindle.
Carefully
read the manufacturer's guidelines and instructions for the chuck. Most
installations are the same, but always refer to the included
instructions if they differ.
Penulis : Unknown ~ Sebuah blog yang menyediakan berbagai macam informasi
Artikel How to Install a Chuck on a Lathe ini dipublish oleh Unknown pada hari Friday, 21 September 2012. Semoga artikel ini dapat bermanfaat.Terimakasih atas kunjungan Anda silahkan tinggalkan komentar.sudah ada 0 komentar: di postingan How to Install a Chuck on a Lathe
0 comments:
Post a Comment